Mobile scaffolding
Mobile scaffolding
What is mobile scaffolding: a mobile scaffold or a mobile working platform?
Terminology
The distinction matters in practice: equipment commonly called mobile scaffolding is classified under the applicable standards as a mobile working platform, rather than scaffolding. DIN EN 1004-1 describes mobile working platforms made of prefabricated components. These are single-bay structures made from system-specific components with specified heights and widths. Mobile scaffolds, by contrast, are mobile structures assembled from scaffold components. In Germany, they are covered by DIN 4420-3, Working and protective scaffolds – Part 3: Selected scaffold types and their standard configurations. They can have several bays. A mobile working platform is usually made of aluminium, whereas a mobile scaffold is made of steel.
In Germany, mobile scaffolds under DIN 4420 must be designed and erected by scaffolders. Mobile working platforms under DIN EN 1004-1 may be erected by competent, instructed persons.
FlexxTower, mobile scaffolding SG or mobile scaffolding: what is the difference?
Product ranges
The ranges differ in who can erect them and how users are protected during assembly.
- FlexxTower single-person scaffolding: One person erects it using the 3T method, sitting in the trapdoor opening. Platform: 600 × 1,250 mm; platform height: 1.1 to 4.1 m.
- FlexxTower SG and FlexxTower SG ergo: Single-person scaffolding with an advance safety railing. The ergo version’s platform is up to 40% lighter than conventional platforms. Platform height: 2.1 to 4.1 m.
- FlexxTower SGX ergo: Single-person scaffolding with an advance safety railing. The Ergo platform is up to 40% lighter than conventional platforms. Platform height: up to 7.55 m; platform: 1,800 × 600 mm.
- Mobile scaffolding SG: At least two people erect this scaffold using an advance safety railing. Platform width: 0.75 m or 1.35 m; length: 1.8 m, 2.45 m or 3 m. Versions are available with outriggers, chassis bars, a double platform or inclined ascents.
- Mobile scaffolding: The standard range has no advance railing. At least two people are needed for assembly. Platform width: 0.75 m or 1.35 m; length: 1.8 m, 2.45 m or 3 m. Temporary advance railings, known as protective assembly railings, are required during assembly.
Buy a mobile scaffold tower: what your price includes
Buy
A MUNK mobile scaffold tower is an investment for years to come. The price includes services that keep your tower safe for longer.
- 15-year manufacturer’s warranty: MUNK offers a 15-year warranty on standard products it manufactures. See the warranty terms for details.
- Replacement parts at the original part price: Every scaffold component is available separately. You only replace what is damaged.
- Extend later: Extension components let you increase your tower’s height. Check the assembly and user instructions for permitted combinations.
- Upgrade to SG: All standard MUNK scaffold towers can be retrofitted with an advanced guardrail. Depending on the model, you may need additional push-fit frames.
- Funding: BG BAU subsidises one-person towers with advanced side protection, such as the FlexxTower SG. It covers 50% of the purchase price, up to €1,500 per tower. Find out more about the BG BAU occupational safety grant.
- Inspection and training: MUNK Service inspects and documents your scaffold towers. Our seminars train your competent persons.
What rules apply to mobile scaffolding?
DIN EN 1004-1
DIN EN 1004-1 specifies that mobile scaffolding classified as a mobile working platform must consist of a single bay. It must be designed for assembly, alteration and dismantling without personal fall protection equipment. Only one deck may serve as a workstation platform at a time. This is normally the top platform; lower levels are intermediate platforms. Under the revised 2021 edition, the distance between platforms must not exceed 2.25 m. The vertical distance from the supporting surface to the first platform must not exceed 3.40 m. How high may mobile scaffolding be? The workstation platform height is limited to 12 m indoors and 8 m outdoors. As a rule, built-in internal access must be provided. Do not climb on the outside of the working platform. Mobile scaffolding must not be used to enter or leave other structures.
How is mobile scaffolding classified?
Classes
Scaffolding is divided into seven width classes, two headroom classes and six load classes. Some of these classifications also apply to mobile scaffolding as mobile working platforms.
The standard identifies width classes with the letter W and two digits. The seven width classes range from 0.60 to 2.40 m in 30 cm increments.
In Germany, system scaffolding usually falls into height class H1: headroom below 1.9 m at the frame. Height class H2 applies from 1.9 m upwards.
The load class defines the maximum uniformly distributed load in a scaffold bay (surface load q1 in kN/m²) or the maximum concentrated loads on specified areas: point load F1 on 500 × 500 mm and point load F2 on 200 × 200 mm. Choose a load class that matches the work. Relevant classes for mobile scaffolding are:
- Load class 1: inspection work only; maximum uniformly distributed live load q1 = 0.75 kN/m²; concentrated load F1 = 1.5 kN or F2 = 1.0 kN.
- Load class 2: work that does not require storage of building materials or components; maximum uniformly distributed live load q1 = 1.5 kN/m²; maximum concentrated load F1 = 1.5 kN or F2 = 1.0 kN.
- Load class 3: work that requires storage of light building materials or components; maximum uniformly distributed live load q1 = 2.0 kN/m²; maximum concentrated load F1 = 1.5 kN or F2 = 1.0 kN.
Erecting mobile scaffolding: one person or two?
Assembly
How many people are needed to erect mobile scaffolding? It depends on the design. Single-person scaffolding such as the FlexxTower can be erected by one person. Hook-in brackets carry individual components during assembly, using the 3T method or, for the FlexxTower SG, integrated advance railings.
Most mobile scaffolding requires at least two people for safe assembly. Components must be passed up, held and secured. At least two people are needed to prevent injury; at greater assembly heights, three or more may be required.
What surface is suitable for erecting mobile scaffolding?
Ground conditions
Mobile scaffolding needs a surface with sufficient load-bearing capacity. Screed and other concrete floors, as well as asphalted or paved surfaces, are suitable. Erect the scaffold vertically on level ground with a maximum slope of 1% or 0.57°. On natural ground, castors can sink and compromise stability. Use suitable boards or planks underneath to spread the load over a larger area.
How can you protect sensitive floors?
Floor protection
For indoor floors, use the swivel castor with spindle, non-marking grey. On soft ground, place load-bearing boards or planks underneath. On stairs, use the stairway kit with rubber pads.
Mobile scaffolding in a stairwell or mobile scaffolding with stairs?
Stairwell scaffolding
The term “stair scaffolding” is often used for two different designs.
Mobile scaffolding in a stairwell: FlexxTower with stairway kit
Standard mobile scaffolding needs a nearly level surface and cannot stand safely on stairs. The FlexxTower with stairway kit is designed for this situation. The kit compensates for the height differences between steps.
The FlexxTower stairway kit 1 replaces the swivel castors with four continuously adjustable feet and floor-protecting rubber pads. Two long telescopic triangular outriggers provide stability. The FlexxTower stairway kit 2 also keeps a passage clear, so others can continue to use the stairs.
With the stairway kit, the maximum working height is approximately 5.9 m. The scaffold stands on adjustable feet and cannot be moved on castors.
Mobile scaffolding with stairs: inclined ascent instead of a ladder
The mobile scaffolding SG with inclined ascents stands on a nearly level surface. Inside the scaffold, steps connect the platforms. You ascend using a handrail and 100 mm deep steps instead of ladder rungs.
Mobile scaffolding: stability
Stability
At low heights, the base area and centre of gravity of mobile scaffolding are usually sufficient for stability. Always apply the parking brakes to prevent unintentional movement. Chassis bars add stability while allowing convenient movement. They enlarge the base and permit two configurations: centred or offset on the chassis bar. Outriggers also increase stability. They are fitted at the four corners to support the structure. Depending on scaffold height, configuration and location, ballast may be necessary. Ballast weights must be solid and secured against unintentional movement. Liquids or granular materials are permitted only in suitable containers supplied by the manufacturer.
Mobile scaffolding: location, wind loads and required ballast
Height and ballast
The maximum assembly heights differ – 12 m inside a building and 8 m outside – mainly because a mobile working platform may be exposed to wind loads outdoors.
DIN EN 1004-1 requires wind loads up to 0.1 kN/m² to be considered. A load of 0.1 kN/m² corresponds to wind speed vp = 45.5 km/h or 12.7 m/s, within Beaufort force 6, a strong wind. Ballast requirements therefore differ indoors and outdoors. At greater heights, an indoor setup may need little or no ballast, while the same height outdoors may require 100 kg or more. This demonstrates the importance of competence, correct assembly according to the manufacturer’s instructions, and a final inspection by a person qualified to perform inspections. The instructions also specify the maximum wind force at which the mobile working platform may be moved outdoors.
Mobile scaffolding: safety information
Safety information
The instructions for assembly and use must be supplied with the mobile working platform. DIN EN 1004-2:2022 replaces DIN EN 1298 from 1996 and specifies what the instructions must contain. They must state that the instructions must be available at the place of use and include, among other information: “This mobile working platform may only be used in accordance with the unaltered specifications in these instructions for assembly and use.” An essential safety rule applies to all mobile working platforms: no people or loose objects may remain on the platform while it is being moved.
DIN EN 1004-2:2022 also introduces further requirements. Safety information pictograms must supplement the text in the instructions for assembly and use. Annex A contains examples. The standard also recommends marking or attaching safety information to the product. It includes pictograms for prohibitions such as the following: